UDC3200 Universal Digital Controller

Product Description

Product Details :

Features :

• 2 Universal Analog Inputs
• Fast scanning rate (166ms)
• Up to 5 Analog Output Types
• Math Functions
• Ethernet and Modbus communication
• Infrared PC & Pocket PC configuration
• NEMA4X and IP66 front face protection
• Multilanguage prompts
• Jumper free configuration
• Easily Field Upgradable
• Bright, dual displays with multi-language prompts (in English, French, German,
• Spanish, or Italian) make the operator interface easy to read, understand, and operate
• Simple keystrokes let you set operating parameters that meet your process control needs

Math Functions :

• Algorithm-A pre-configured algorithm is available for easy implementation.
• This includes the capability of using a Ratio and Bias with any input.
• You can select from the following menu: Feedforward Summer-Uses either input, followed by a Ratio/Bias calculation, summed directly with the computed PID output value to provide a resultant output to the final control element (standard feature).
• Weighted Average Computes the weighted average of a PV or SP for the control algorithm from two inputs (standard feature)
• Feed forward Multiplier-Uses any input, multiplied by the calculated PID output to provide a resultant output which is sent to the final control element (standard feature).
• Summer/Subtractor-Will add or subtract inputs with the result used as the derived PV
• Multiplier/Divider-Uses the analog inputs to calculate a derived PV
• Available with or without Square Root
• Input High/Low Select-Specifies the PV input as the higher or lower of the two inputs

Digital Inputs:

• Two isolated digital inputs are provided for remote dry contact closure to select one of the following actions: Manual control mode
• Local setpoint 1
• Local setpoint 2
• Local setpoint 3
• Direct controller action
• Hold SP Ramp/Program
• Select PID set 2
• PV = Input 2
• ReRun - SP Ramp/Program
• Run - SP Ramp/Program
• External program reset
• Disable PID integral action
• Manual mode, failsafe output
• Disable keyboard
• Output 1 = Fixed value
• Start Timer
• Auto/Manual Station
• Initiate Tuning
• Initiate PV Hot Start
• Output 1 tracks Input 2
• To Remote Setpoint
• PID reset feedback via Input 2
• Purge
• Low Fire
• To Latching Manual Mode.
• Also, the digital inputs can allow one of the following selections to be combined with one of the above selections: Select PID set 2
• Direct controller action
• Local setpoint 2 or Local setpoint 1
• Disable Accutune
• To Run - SP Ramp/Program
• The 2nd Current Output and the 2nd
• Digital Input are mutually exclusive
• Selection is made via a keyboard entry